Technics SE-A100

Spec

Technics SE-A100

Rated output (20Hz - 20kHz) ...............240W + 240W (4 Ω, 0.002%)
200W + 200W (6 Ω, 0.001%)
170W + 170W (8 Ω, 0.0007%)

Dynamic power (IHF).......600W + 600W (2 Ω) /600W + 600W (2 Ω ±60 MARU reactance load)
400W + 400W (4 Ω) /400W + 400W (4 Ω ±60 MARU reactance load)
275W + 275W (6 Ω) /275W + 275W (6 Ω ±60 MARU reactance load)
225W + 225W (8 Ω) /225W + 225W (8 Ω ±60 MARU reactance load)

Distortion factor........................................ (-3dB)

1kHz:

Measurement limit (0.0002%) or less (6 Ω)
Measurement limit (0.0002%) or less (6 Ω ±60 MARU reactance load)
Measurement limit (0.0002%) or less (8 Ω)
Measurement limit (0.0002%) or less (8 Ω ±60 MARU reactance load)

20Hz - 20kHz:...

0.0009% or less (6 Ω /6 Ω ±60 MARU)
0.0007% or less (8 Ω /8 Ω ±60 MARU)

Frequency characteristic.................... 0.8Hz - 150kHz +0 -3dB 20Hz - 20kHz +0 -0.1dB

Output bandwidth............................... 5Hz - 100kHz (cpo -3dB, 0.01% and 8 Ω)

Signal-noise ratio ..............................120dB (IHF'66) 93dB (EIAJ)

Residual noise voltage .......................300 μ V or less (Lin. ) 50 μ V or less (IHF-A)

Input sensitivity/impedance................ 1.2V/47k Ω

Damping factor....................................120 (8 Ω)

Meter indicating range........................ 0.0001W - 300W (8 Ω) -60dB - +2dB

Meter indication precision.................. ±3dB (-40dB above) ±5dB (-40dB under)

Meter attack time/recovery time...........100 μ s/300ms

Electric power consumption..................400W

Power source AC..................................100V and 50/60Hz

External size ........................................Width 476× height 209× depth 475mm

Weight...................................................33.7kg

Särskilda egenskaper