Luxman L 525

Spec

 Thanks for pictures Torsten N...This one is for sale

torsten@skane-online.se

           Luxman L-525
Power Output: 110W+110W (8n, both channels driven, 20Hz-20kHz)
Dynamic Power: 230W(4n)
T.H.D.: no more than 0.007% (8ohm, 20Hz-20kHz, -3dB)
Rated IM: no more than 0.007% (8n, -3dB, 60Hz: 7kHz = 4:1)
Input Sensitivity & Impedance: phono (MM);

phono (MC);

tuner/CD/line; 

main-in;

2mV/50kn

I00uV/40 ohm, 100 ohm, 300 ohm

150mV/40kohm

150mV/40kohm

Signai-to-Noise Ratio (IHF-A weighted) :phono (MM);

 

phono (MC);

 

tuner/CD/line;

 

 

main in;

better than 85dB  (input 5mV)

 

better than 70dB (input 250uV)

 

better than 1l0 dB (input short-circuited)

 

better than 110 dB

(input short-circuited)

Frequency Response : phono (MM/MC); tuner/CD/line; main-in; 20Hz-20kHz (within ±0.3dB) lOHz-lOOkHz (within -ldB) lOHz-lOOkHz (within -ldB)
Tone Control: max. variable amount; ±8dB

bass turnover frequencies; 77Hz, 1 20Hz, 200Hz, 330Hz, 550Hz, 880Hz,

treble turnover frequencies; 880Hz, 1.5kHz, 2.5kHz,4kHz,6.5kHz,10kHz

Pre Out: 150mV
Additional Features: subsonic filter (15Hz),high-cut filter (9kHz),

warm-up indicator, phono-straight switch,

signal-off switch, tone-in switch, recording switch,

tape monitor & dubbing, speaker selector, etc.

Dimensions: 453CW)x 430(D) x 162(H) mm
Weight: 14.3 kgs

 

Särskilda egenskaper

subsonic filter (15Hz),high-cut filter (9kHz),

warm-up indicator, phono-straight switch,

signal-off switch, tone-in switch, recording switch,

tape monitor & dubbing, speaker selector, etc.

 

© Loudandproud hifigoteborg