Luxman L-560

Spec

            Luxman L-560
Power Output: 50W+50W 4ohm, both channels driven, 20Hz-20kHz)
T.H.D.: no more than 0.005" (8n, 20Hz-20kHz, -3dB)
Rated IM: no more than 0.005" )8n, -3dB,60Hz;7kHz = 4:l)
Input Sensitivity & Impedance: phono (MM);

phono (MC);

tuner/CD/line;

main-in;

2mV/50kohm

90juV/40ohm, loon

150mV/40kfi

150mV,'47kohm

Signal-to-Noise Ratir (IHF-A weighted)  phono (MM);

phono (MC);

tuner/CD/line;

main-in;

better than 86dB (input 5mV)

better than 80dB (input250mV)

better than llOdB(input short-circuited)                               better than IlOdB (input short-circuited)

Frequency Response : phono (MM/MC);

tuner/CD/line;

main in;

20Hz-20kHz (within ±0.2dB)

                                                  lOHz-lOOkHz (within -IdB)

lOHz-lOOkHz (within -IdB)

Tone Control: max.variable amount; ±9dB

bass turnover frequencies; 55Hz, 77Hz, 110Hz, 155Hz, 220Hz, 310Hz.440Hz, 620Hz, 880Hz

treble turnover frequencies; 620Hz, 880Hz, 1.2kHz,1.7kHz, 2.5kHz, 3.5kHz,

5kHz, 7kHz, 10kHz
Pre Out: 150mV
Dimensions: 453(W)x 470(D) x 174(H) mm
Weight: 20kgs

Särskilda egenskaper

subsonic filter (15Hz), high-cut filter (9kHz)

pre-heat switch, warm-up indicator.

phono-straight & CD-straight switches,

signal-off switch, recording switch, tape monitor,

tape dubbing, speaker selector, etc.

 

© Loudandproud hifigoteborg