Music power (IHF).................... 70W (4 Ω) 50W (8 Ω)

Effective output (IHF)............... 20W/20W (4 Ω)
17W/17W (8 Ω)  7Hz - 40kHz, -3dB

Frequency characteristic

AUX:...................................... 15Hz - 50kHz +0 -3dB

Total height harmonic wave distortion factor............ 0.5%

Cross modulation distortion factor.... (60Hz: 7kHz = 4: 1, at the time of effective output) 0.7% Signal-noise ratio (IHF)

Phono: ..........................................70dB
AUX:.............................................. 90dB

Damping factor................................. 70 (at the time of 8 Ω load)

Input sensitivity/impedance

Phono (Low):.................................... 2mv/50k Ω
Phono (High):................................... 10mV/100k Ω
AUX: ................................................160mV/100k Ω

Tape monitor Rec Out:....................... 160mV
Playback:.......................................... 160mV/100k Ω

                 Tone control

Bass:............................... 50Hz, +13 - -14dB
Treble: .............................10kHz and ±12dB

High filter ...........................5kHz, -6dB/oct

Loudness control............ 50Hz, +12dB   10kHz, +5dB

                            FM section      

Reception frequency ............................76MHz - 90MHz

Sensitivity (IHF) ...................................1.8 μ V

Selectivity (IHF) ...................................70dB

Signal-noise ratio (IHF)......................... 60dB (100% irregularity and 1kHz)

Capturing ratio ......................................2dB

Image disturbance ratio......................... 90dB (83MHz)

IF disturbance ratio ...............................90dB (83MHz)

 disturbance ratio ...................................75dB (83MHz) AM

oppressing ratio .....................................45dB

Stereo separation.................................... 35dB

 Total height harmonic wave distortion factor........ 0.4% (100% irregularity and 400Hz)

                     Synthesis 

 Use semiconductor

IC: ...............................................1
FET:............................................ 1
Transistor:................................... 45
Diode:......................................... 22

Power source...................... AC100V and 50/60Hz

Electric power consumption At the time of rated output:........ 70W

External size................. Width 406× height 140× depth 356mm Weight 8.6kg